There are a number of reasons why you might have a hot water heater leaking. The most common is probably because the heater itself is faulty. Other times it might be because the tank or pipes for your water heating system have been degraded. Leakage from a water heater can be quite catastrophic, especially if you have very large and bulky items such as RVs, boats, or pool cabins. But leaky pipes can also occur in houses with inadequate pipe work or those that simply don’t maintain their pipes to the quality needed.
So, what do you do when you have a hot water heater leaking? If it is a minor leak, it may be possible to mend the problem yourself. Or you might opt to call a professional plumber. Even then, some leaks can be fixed by a simple cleaning. You may not want to wait to see if the situation improves.
First of all, let’s take a look at why a water heater might leak. Generally, the tank of a hot water heater has several copper pipes leading to its tank. These pipes are not only reinforced but are also insulated to protect the tank itself.
When hot water is poured into the tank, several vaporized chemicals react with the water. This reaction produces heat energy, which heats the water. A steady supply of hot water Hot Water Heater Leaking In Oakville is critical to keeping homes warm and comfortable. However, if this heat energy is interrupted, then cold temperatures result.
So how do you know if your water heater has a leak? The signs to look for include a slow dripping toilet or an accompanying “plumbing emergency.” Check the heating element and its terminal connection points on the tank and wall. You should also check the heating element fins on the bottom of the tank to make sure they are sealed. If any of these things are damaged, then it’s likely that the tank has a leak.
How can you address the hot water heater leaking problem? One way to repair a leaking tank is to add a plastic insert to the tank’s walls. This will keep the leak from getting into the flue. It is usually sold in bulk and you can buy enough to cover the length of the leaky part of the tank.
Another way to address a hot water heater leaking problem is to add an air gap between the outer lid and the heater. This can be achieved by wrapping the outer lid insulation around the tank as in a blanket. This should close off the immediate area where the hot water would be coming from. You could also add a piece of plywood to the bottom of the tank as well as some Styrofoam. This will help keep the leak from getting so close to the flue pipe that the flue pipes get clogged.
If none of the above work to address the problem with your hot water heater, then you might have to look at having the tank totally replaced. It is possible that the entire tank is not leaking; in this case, you need to replace the water heater itself. The tank may have been installed incorrectly, or it could be that the flue was plugged or the seals were damaged somehow.
The condition of the tank or flue could be poor enough to warrant getting a tank inspection done. If the inspection shows the tank is not leaking, then there are a few more things to check. If the water is still being heated, or if the hot water is not coming from the hot water tank, then there could be a defect in either the heating system or the seals. You can also have the flue checked by a qualified heating engineer.
A professional will know if the tank or the part of it is leaking. In order to repair the issue, you will need to get all the parts and the hot water heater to the local repair shop. Make sure they know exactly what you need, as some small repairs can be expensive. Some of the things that may need to check are the drain tube, the floor drain, and possibly even the gas tank. If any of these parts are showing signs of wear and tear, then replacing them may be required.
When getting to the repair shop, you will probably need to remove the tank. Once it is removed, you can look inside at the parts to see if they need replacing. The other option is to hire a professional to see if he can fix the leak. It’s a good idea to do this before trying to replace the tank yourself, as it may be too complicated for you to replace a faulty tank with the same problems.